Генератор tellraw для майнкрафта

Для начала вам нужно понять, что такое /tellraw. Команда /tellraw нужна для написания текста в чате. Он может быть цветной, подчёркнутый, перечёркнутый, курсив, жирный, по нему можно кликнуть, если навести на него курсор, нам выведет описание. И всё это /tellraw.

Итак, я вам продемонстрирую, что можно сделать с помощью этой команды.

Давайте я вам всё объясню. сама команда «/tellraw» имеет основу: /tellraw (селектор) (теги)
То есть, я написал саму команду «/tellraw», затем селектор «@a» и несколько тегов. Все теги заключаются в квадратные скобки, а текст с группой тегов в фигурные.
Давайте сделаем что-нибудь простенькое.
Например просто текст: /tellraw @a [

]
Это у нас будет выглядеть вот так.

Чтобы добавить цвет, нам нужно добавить к тегу «text» ещё один тег «color».
Например: /tellraw @a [

В принципе, основы я вам рассказал, в следующем уроке, мы разберём другие теги, а также, как сделать текст разных цветов на одной линии.

[Гайд] Команда /tellraw для новичков

Итак, команда /tellraw предназначена для создания интерактивного чата. Например, с её помощью, мы можем окрашивать сообщения в чате в различные цвета, а также задавать действия, которые будут выполняться при нажатии на тот, или иной отрывок текста.

На сайте уже есть статья по ручной настройке команды. Если Вы хотите изучить её — нажмите сюда.

Стоит учесть, что для тех методов, которые я буду описывать ниже, потребуется специальный сайт. Перейти на него Вы можете нажав на эту кнопку.

Как работать с сайтом? На самом деле, достаточно просто. Основные параметры разобраны ниже.

После настройки основных параметров, нам потребуется нажать на кнопку «Add Text». После её нажатия появится очень много настроек. Переключая параметры Raw, Translated и Scoreboard Objective, мы можем настроить то, что будет выводится в чате. Справа от этой настройки находится меню управления атрибутами текста (Цвет, и.т.д). Параметр «Click Event» отвечает за то, что будет сделано при нажатии на текст, а «Hover Event» за то, что будет выполняться при наведении курсора на текст. Значение параметра «Insertion», я понять не смог. У меня от его появления ничего не изменялось. После нажатия кнопки «Add» текст будет добавлен в команду. Также, можно добавлять несколько отрывков теста. Это позволяет задать разные действия при взаимодействии с разными частями текста.

Также, не стоит забывать, что команда /tellraw была добавлена в версии 1.7. Поэтому, данный подход не будет работать на меньшей версии.

[1.7+][Guide] Туториал по /tellraw 3/3 — Сложные теги

Сложные теги, это теги, с помощью которых, мы сможем делать всякие диалоги, выполнять команды нажатием на текст. Эти теги пишутся намного сложнее, чем простые, их придётся запоминать дольше.

Итак, определим цели. Нам нужно научиться использовать сложные теги.
У нас должен текст, при наведении на который нам пишется «бесплатный алмазик», при клике на него давался алмазик, при Shift+Click нам писали текст «Пасхалка». /tellraw @p [

Мы разберём такие теги как:
— ClickEvent
— HoverEvent
— insertion

На этом тег ClickEvent заканчивается, переходим к HoverEvent

HoverEvent показывает заданный текст, предмет, ачивку при наведении.
Вот шаблон HoverEvent: /tellraw @p [

insertion отвечает за Shift+Click по тексту и выводит в строку чата то, что вы указали, команду, текст.
Вот шаблон: /tellraw @p [

Тегов для insertion никаких нет

На этом всё, на самом деле вся эта серия туториалов был 1 большой троллинг.
Вот держите сайт для генерации /tellraw, книжек, /title, табличек
Но всё равно, пользуйтесь приобретёнными навыками
С вами был Just_Lemon , всем пока.

minecraftTellrawGenerator 1.0.5

pip install minecraftTellrawGenerator Copy PIP instructions

Easily create minecraft tellraw command

Navigation

Project links

Statistics

View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

Tags minecraft, tellraw, command

Requires: Python >=3

Maintainers

Classifiers

  • Development Status
    • 5 — Production/Stable
    • Developers
    • System Administrators
    • French
    • Python :: 3 :: Only
    • Software Development :: Build Tools
    • Utilities

    Project description

    Project details

    Project links

    Statistics

    View statistics for this project via Libraries.io, or by using our public dataset on Google BigQuery

    Tags minecraft, tellraw, command

    Requires: Python >=3

    Maintainers

    Classifiers

    • Development Status
      • 5 — Production/Stable
      • Developers
      • System Administrators
      • French
      • Python :: 3 :: Only
      • Software Development :: Build Tools
      • Utilities

      Release history Release notifications | RSS feed

      Download files

      Download the file for your platform. If you’re not sure which to choose, learn more about installing packages.

      Читайте также: Генератор 28011 а мнва

      Extreme /tellraw Tutorial

      Hi there.
      This tutorial will take you through tellraw, which is a very complicated command. It is a raw JSON command, and we will probably get confused at some point. BUT, lets get on. Stick with me even when it is tough.
      1) Using /tellraw

      Tellraw is a command for command blocks. Do /give 137 or /give Minecraft:Command_Block as the item id numbers will stop working in 1.8. Note that /tellraw will normally only work on singleplayer (or it doesn’t work on my server anyways. ).
      2) The Simple Command (Base Command)

      Well, you kinda already know /tellraw is your base command. But, this is the simple start (ALL /tellraw commands require this at the beginning):
      /tellraw @a
      3) Lets add some text.

      Time to add text! Here is our work:
      /tellraw @a

      Yes, you guessed it. We will be making a realistic Notch join message. Feel free to change this text to whatever you like, but all of my examples shall stem from this.

      So, we will have to edit our code so far for this.
      tellraw @a ]>
      Yes, this is alot more complicated. I understand if you feel like copy and pasting this, so go for it! But, now, I will explain:
      tellraw: Command
      @a: Everyone online
      «text»: The Text Variable
      «Notch joined the game»: The Text
      «color»: The Color Variable
      «yellow»: The Color

      5) Ok, now we have finished the simple stuff, lets underline it.

      Now, we need to make the text underlined so it looks. cool.
      We will need to, inside or brackets but at the end, add a comma and then «underlined». This is a boolean variable: It only can return true or false. We will set it to true, so we will add a colon and then, in speech marks, enter true. Ok, lets see if you have got it right:
      tellraw @a ]>

      6) Bored. Lets make this. awesome:

      Lets add a hover effect, or, in better terms: event. Take note on what we do here, as it will matter for the next part. I will give you our syntax and you can copy it and then I will show you what it does:
      tellraw @a >]>
      Ok, lets explain:
      «hoverEvent»: The Variable. It is always in ‘Camel Case’; the first word is lowercase and then all words start with a cap.
      ,»hoverEvent»: >]>

      Yes, we have to use a command in the clickEvent. Therefore, we can do many commands: We could use /tellraw or even /toggledownfall. Awesome, eh.

      Well done, you are now a /tellraw master. Feel free to take this further and ask me questions if needed. Feel free to subscribe to me if this helped you lots.

      Command Tutorials: Tellraw

      Hey, guys! This is Bob here and today I want to bring you a tutorial on the tellraw command. This command is very useful, yet hard to understand.

      [EDIT: ON ALL THE LINKS THAT ARE FOR COLOR, SCROLL DOWN ON THE LEFT SIDE AND CLICK CHAT COLOR]

      There are a few things you must understand before we start. Realize you are learning JSON. Pretty much everything you type goes in quotation marks. Here is an example command:

      This will output: Yo, Planet Minecraft

      Lets start with the tutorial. EVERYTIME you start to type this command, it will go «/tellraw @[selector] <>«. The [selector]’s, if you didn’t know, are @a for all players, @r for a random player, @p for the nearest player to the command block or player(yourself).

      Now, inside of the curly brackets, we can put all the information. The first thing you put is this exactly:

      So this is what it does. The «text» tells the client that its going to output something into the chat. The » [text here] » is just where you put the text you want it to output. Anytime you want to add quotation marks inside of the quotation marks(if that makes sense), you just add a back slash( ). The «color» part tells the client that it’s going to output something in color. The [i]» [color] «[/i] is where you add your color.

      Читайте также: Генератор denso 02131 9113

      Now, you’re probably wondering what the commas and colons do. Colons are pretty much equal signs. So in our line of text above, we have [i]»text»:» [text here] » [/i]This is pretty much saying, that the [i]»text»[/i] will be[i] » [text here] «[/i]. The one comma we see is before the[i] «color»[/i] part. The comma says that the text will have color(describing it,[i] » [text here] «,»color»[/i]).

      This next part is a little complicated. We have our regular line of text, but say we want some more that have a different color:

      So we have the same thing as the first part, but we added the [i]extra:[][/i] part. Extra is pretty much everything after the first part of text. Inside of[i] extra:[][/i], you go back to the first part of the text. Just make sure you put them inside of curly brackets. Everytime you go to make another color of text, you close the curly bracket you started and you put a comma, start another curly bracket, and continue. This is what it looks like, in visual terms:

      Looks like this:[b][color=rgb(255,255,0)] Hey, friends![/color] [color=rgb(51,204,0)]What do you want to do?[/color] [color=rgb(255,0,0)]I want to play Minecraft.[/color][/b]

      [size=12px][color=rgb(34,34,34)]To make bold, type this after the color tag:[/color][/size]

      [size=12px][color=rgb(34,34,34)]This will output this:[/color][/size]

      [size=12px][color=rgb(34,34,34)][b][color=rgb(255,0,0)]Hey PMC[/color][/b](That’s suppose to be bolded :O)[/color][/size]

      [size=12px][color=rgb(34,34,34)]That will work with everything (italic,bold,strikethrough)[/color][/size]
      Well, this is the tutorial! I would always love to add more if you’d like, it’s a little hard to do, but I try! Thanks for reading all the way through if you have made it this far, and be sure to:

      How to Use the TellRaw Command in Minecraft

      This Minecraft tutorial explains how to use the /tellraw command with screenshots and step-by-step instructions.

      You can use the /tellraw command to send a private JSON message to a player or group of players in Minecraft. This function allows you to format color, bold and italics for the message. Let’s explore how to use this cheat (game command).

      Supported Platforms

      The /tellraw command is available in the following versions of Minecraft:

      Platform Supported (Version*)
      Java Edition (PC/Mac) Yes (1.7.2)
      Pocket Edition (PE) Yes (1.9.0)
      Xbox 360 No
      Xbox One Yes (1.9.0)
      PS3 No
      PS4 Yes (1.14.0)
      Wii U No
      Nintendo Switch Yes (1.9.0)
      Windows 10 Edition Yes (1.9.0)
      Education Edition Yes (1.9.0)

      * The version that it was added or removed, if applicable.
      NOTE: Pocket Edition (PE), Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.

      Requirements

      To run game commands in Minecraft, you have to turn cheats on in your world.

      TellRaw Command

      TellRaw Command in Minecraft Java Edition (PC/Mac)

      In Minecraft Java Edition (PC/Mac), the syntax to send a private JSON message to a player is:

      Definitions

      message is the private message to send. It is formatted as raw JSON and most values (except true or false ) must be enclosed in double quotes. It can have values such as:

      1. text — message that appears in title screen (ie: «text»:»The End is Near» ).
      2. bold — true or false value to indicate whether the text is bolded (ie: «bold»:true ).
      3. italic — true or false value to indicate whether the text is italicized (ie: «italic»:true ).
      4. color — the color of the text that will appear (ie: «color»:»red» ).
        The color can be one of the following: red, dark_red, yellow, gold, green, dark_green, blue, dark_blue, aqua, dark_aqua, light_purple, dark_purple, gray, dark_gray, white, black

      TellRaw Command in Minecraft Pocket Edition (PE)

      In Minecraft Pocket Edition (PE), the syntax to send a private JSON message to a player is:

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      TellRaw Command in Minecraft Xbox One Edition

      In Minecraft Xbox One Edition, the syntax to send a private JSON message to a player is:

      Читайте также: Улучшенный генератор булыжника для скайблока

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      TellRaw Command in Minecraft PS4 Edition

      In Minecraft PS4 Edition, the syntax to send a private JSON message to a player is:

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      TellRaw Command in Minecraft Nintendo Switch Edition

      In Minecraft Nintendo Switch Edition, the syntax to send a private JSON message to a player is:

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      TellRaw Command in Minecraft Windows 10 Edition

      In Minecraft Windows 10 Edition, the syntax to send a private JSON message to a player is:

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      TellRaw Command in Minecraft Education Edition

      In Minecraft Education Edition, the syntax to send a private JSON message to a player is:

      Definitions

      • target is the name of a player (or a target selector) to send the private message to.
      • raw json message is the private message to send. It must be in a rawtext object that contains an array with the message.

      Examples

      Example in Java Edition (PC/Mac)

      To send the private message «Herobrine joined the game» in yellow text to the player called DigMinecraft in Minecraft Java Edition (PC/Mac):

      To send the private message «Let’s Begin!» to a random player:

      Example in Pocket Edition (PE)

      To send the private message «Go to the Pillager Outpost» to the player called DigMinecraft in Minecraft PE:

      Example in Xbox One Edition

      To send the private message «Look behind you» to the player called Axe2Grind in Minecraft Xbox One Edition:

      Example in PS4 Edition

      To send the private message «Look for a Bee Nest» to the player called Axe2Grind in Minecraft PS4 Edition:

      Example in Nintendo Switch Edition

      To send the private message «Go West» to the nearest player called TheEarthMover in Minecraft Nintendo Switch Edition:

      Example in Windows 10 Edition

      To send the private message «Meet me at the Village» to the player called DigMinecraft in Minecraft Windows 10 Edition:

      Example in Education Edition

      To send the private message «Run!» to the player called TheExcavator in Minecraft Education Edition:

      How to Enter the Command

      1. Open the Chat Window

      The easiest way to run a command in Minecraft is within the chat window. The game control to open the chat window depends on the version of Minecraft:

      • For Java Edition (PC/Mac), press the T key to open the chat window.
      • For Pocket Edition (PE), tap on the chat button at the top of the screen.
      • For Xbox One, press the D-Pad (right) on the controller.
      • For PS4, press the D-Pad (right) on the controller.
      • For Nintendo Switch, press the right arrow button on the controller.
      • For Windows 10 Edition, press the T key to open the chat window.
      • For Education Edition, press the T key to open the chat window.

      2. Type the Command

      In this example, we will send a private message to the player called DigMinecraft with the following command:

      Type the command in the chat window. As you are typing, you will see the command appear in the lower left corner of the game window. Press the Enter key to run the command.

      Once the cheat has been entered, the message will be displayed to the targeted players.

      In this example, the message » Herobrine joined the game » will be displayed in the Chat window of the player named DigMinecraft.

      Congratulations, you just learned how to use the /tellraw command in Minecraft!

      Other Game Commands

      You can use other commands and cheats in Minecraft such as: